FORMULA 7961
TYPE : Moderate-Foam, Non-Fuming Acid Cleaner PROD.# 1098
BENEFITS : High concentration of mild, non-fuming acid cleaning agents for use in clean up of concrete mixing equipment, rust removal, and scale removal from stainless steel and aluminum equipment. Harmless to paint and rubber in use dilution.
FEATURES BENEFITS
• Economical • Concentrate to be diluted with water prior to use
• Non-fuming • Eliminates irritation to user, and corrosive effects on surfaces of application
• Fast penetrating • Speeds up the cleaning of concrete equipment and helps loosen the concrete quickly
• Can be used on most paints • Will not harm most paints when used as directed on label. Does not cause corrosion of metals as is often the case with harsher acids.
• Acceptable for use in food • Appropriate for use as an acid cleaner for all surfaces
processing applications
DESCRIPTION
Non-irritating, mild, mineral acid type liquid chemical cleaner containing a concentrated blend of strong, non-fuming mineral acids and wetting agents.
APPLICATIONS
Cleans all surfaces and windows of concrete mixing equipment, cleans masonry and descales.
Concrete Mixers Food Processing Plants Metalworking Plants Warehouse Floors
SPECIFICATIONS
Physical form . . . . . . . . . . . . . . .CLEAR, COLORLESS LIQUID
Flash point (TCC) . . . . . . . . . . . .None
Odor . . . . . . . . . . . . . . . . . . . . . .MILD ACIDIC ODOR
pH (concentrate) . . . . . . . . . . . . .1.0-1.5
(1% solution) . . . . . . . . . . . . .1.5-2.0
Specific gravity . . . . . . . . . . . . . .1.24
Boiling point . . . . . . . . . . . . . . . .225°F
Shelf life . . . . . . . . . . . . . . . . . . .1 year minimum
DOT Shipping label . . . . . . . . . .CORROSIVE LIQUID, ACIDIC,
. . . . . . . . . . . . . . . . . . . . . . . . . .INORGANIC, N.O.S.
Authorized by U.S.D.A. for use in Federally inspected meat and poultry
plants.
DIRECTIONS:
For Cleaning Ready-Mix Trucks: Dilute ZEP FORMULA 7961 one part to
three parts water. Brush or spray on drum, chute and other contaminated
parts of truck and allow 5 to 10 minutes soaking time. Agitate heavy deposits
with a brush to facilitate removal. Rinse thoroughly with a strong stream of
water. For Windshields of Ready-Mix Trucks: Dilute one part of ZEP
FORMULA 7961 with five parts of water. Apply to windshield with soft bristle
brush and agitate periodically. When cement appears loosened, rinse
thoroughly with plenty of clean water. For Cleaning Masonry: Dilute one
part ZEP FORMULA 7961 with three parts water. Apply to brick, stone and
tile surfaces with spray or brush. Agitate periodically until all cement is
loosened. Rinse thoroughly with plenty of clean water. For Removal of
Calcium and Protein Scale from Processing Equipment in Meat and
Poultry Processing Plants: Dilute ZEP FORMULA 7961 one part with 5
parts water. Thoroughly wet the equipment surface with this solution. Allow
5 to 10 minutes soaking time. Concentration and soaking time may be varied
depending upon the degree of scale buildup. Scrub with natural bristle brush
or scouring pad. Rinse thoroughly with fresh water. To Brighten Aluminum,
Galvanized, or Stainless Steel Surfaces: Dilute ZEP FORMULA 7961 with
3 to 5 parts of water. Thoroughly wet the surface with the solution. Allow
solution to remain on surface, scrubbing intermittently with a brush or
scouring pad, until metal surface is brightened to the desired degree. Rinse
thoroughly with water. Repeat when necessary on severely dulled surfaces.
To Etch Concrete Floor Prior to Sealing: Dilute 1 part ZEP FORMULA 7961
with 2-3 parts water. Apply to floor and spread with suitable applicator.
Allow solution to stand for 5 minutes and keep wet. Then rinse well with
water. Allow surface to DRY THOROUGHLY before applying sealer. Coil
Cleaning and Brightening: Heavily Soiled Equipment — Mix 1 part ZEP
FORMULA 7961 with 1 to 2 parts water. Apply with a low pressure, acid
resistant sprayer (coarse spray) and allow a short soak period to loosen soil
and oxidation. Rinse thoroughly with water. Routine Maintenance — Mix 1
part ZEP FORMULA 7961 with 4 to 6 parts water and use as outlined above.
NOTE: DO NOT use this product on anodized or highly polished metal
surfaces (including stainless steel and aluminum), or on marble, and do not
allow runoff to contact such surfaces, as irreversible damage may occur.
Should product accidentally contact any of these surfaces, flush immediately
with water.
-Shipping is flat rate Plus $37 for the Hazardous Material Surcharge
-Sales tax applied if you are in: NY